Filter
Top Products
8-14
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Log Codes
SRM Log Codes
2120 BNM FPGA Download Error, Error occurred while downloading image
from FPGA. Additional information
regarding the specific instance is
displayed.
2121 BNM Init Info: Information useful for
debugging/administration purposes.
Table 8-4 BNM Log Codes (continued)
Error Number Display Log String Detail Description
Table 8-5 SRM Log Codes
Error Number Display Log String Detail Description
5000 Fail to allocate a semaphore
ID
Failed to create a VxWorks semaphore while
initializing SRM control structures.
5001 Line Configuration Failure Failed to configure a line. The particular port number
is also displayed.
5002 Unable to get a message
from the message queue
Error occurred while receiving a message by another
task through the message queue.
5003 Misdirected message in
SRMT message queue
Message not intended for the SRM task has been
received through the message queue.
5004 Received message length
not correct for message type
Length of the message received through the message
queue is invalid for the particular message type.
5005 Invalid Core card state
specified
Not used.
5006 Unexpected message from a
task
Received a message from unknown source. Source ID
is invalid.
5007 Unknown message type
from SMM task
Received a message of unknown type from the SMM
task.
5008 Cannot allocate memory: Failed to allocate memory. SRM task running out of
memory space.
5009 Fail to load ENCODER 0 Failed to load SRM FPGA encoder 0.
5010 Fail to load ENCODER 1 Failed to load SRM FPGA encoder 1.
5011 Fail to load ENCODER 2 Failed to load SRM FPGA encoder 2.
5012 Fail to load DECODER 0 Failed to load SRM FPGA decoder 0.
5013 Fail to load DECODER 1 Failed to load SRM FPGA decoder 1.
5014 Fail to load CLOCK Failed to load SRM FPGA clock control.
5015 Fail to load FPGA Failed to load FPGA image.