Filter
Top Products
3-19
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
TFTP User Interface
Save TFTP Command Format
This mechanism allows copying a FRSM configuration file (saved on the PCMCIA hard drive) to a
network file system using a TFTP file command.
TFTP file name format
AXIS_SM_1_ slot number.PRI. service user password
TFTP client operation
<UNIX prompt> tftp AXIS ip address
> bin
> get AXIS_SM_1_5.PRI.serviceuser
For example, the command get AXIS_SM_1_5.PRI.serviceuser saves the configuration file for the
service module in slot 5 by reading the FRSM 5 configuration stored in the PCMICIA hard drive.
Restore TFTP Command Format
This mechanism allows the user to copy a FRSM configuration file from a network file system to the
corresponding FRSM configuration file on ASC PCMCIA hard drive.
FTP file name format
AXIS_SM_1_ slot number .PRI. service user password
TFTP client operation
<UNIX prompt> tftp AXIS address
> bin
> put network file name AXIS_SM_1_5.PRI.serviceuser
This will restore the FRSM 5 configuration.
For example, put AXIS_SM_1_5.PRI.serviceuser places the configuration file onto the service
module in slot 5.
Note The uploaded file is a binary file.
Note You will lose some configuration changes if they are made after the back-up was performed.
The configuration file contains feature information. If they do not match the feature information on
the FRSM, the FRSM goes into mismatch state.