Filter
Top Products
8-12
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Log Codes
2032 Error in aumAddConn while
rebuilding from BRAM
Error occurred while rebuilding
connections from the BRAM. Additional
information regarding the specific instance
is displayed.
2048 Internal FW Error. Access to
unrecognized PIO port
Invalid PIO port specified to read from a
device.
2049 Internal FW Error. Access to
unknown I/O port
Invalid device I/O port specified to read
from a device.
2050 Internal FW Error. Connection
database corrupted
Not used.
2051 Internal FW Error. LCN linked
list corrupted
Error occurred while building the LCN list
for OAM cells. Additional information
regarding the specific instance is
displayed.
2052 Internal FW Error. Unrecognized
AUM port
Invalid BNM (AUM) port.
2053 Internal FW Error. Unrecognized
clock source
Invalid mux clock source encountered
while configuring clock mux.
2054 Internal FW Error. Unrecognized
clock mux
Invalid clock mux.
2055 Internal FW Error. Unrecognized
port number
Invalid port number encountered while
enabling/disabling the line transmission
function.
2056 Internal FW Error. Unrecognized
counter
Invalid counter number encountered.
2057 Internal FW Error. ADC timeout ADC error occurred. Additional
information regarding the specific instance
is displayed.
2058 Internal FW Error. Unrecognized
fan tray
Invalid fan tray number encountered.
2064 HW Error. XILINX fails to
respond to INIT signal
Not used.
2065 HW Error. XILINX fails to
respond with DONE signal
Error occurred while downloading Xilinx
image. Additional information regarding
the specific instance is displayed.
2066 HW Error. XILINX Init pin went
low during download
Error occurred while downloading Xilinx
image.
2067 HW Error. PLL failure (E3 port) Not used.
2068 HW Error. Invalid Front Card
Type
Invalid front card type. BNM cannot stay
in the active state.
2069 HW Error. ADC Zero Calibration
Error
ADC zero calibration error occurred.
Table 8-4 BNM Log Codes (continued)
Error Number Display Log String Detail Description