Filter
Top Products
5-2
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Setting up a Frame Relay Connection
Figure 5-1 Cisco WAN Manager Connection Manager Screen for the MGX 8220 Shelf
Via the Command-Line Interface
The command-line interface (CLI) provides the capability to set up a variety of Frame Relay
connections.
FRSM Network Interworking Connections
The following sections describe how to establish an end-to-end Frame Relay connection with network
interworking and MGX 8220 FRSM end points.
Figure 5-2 shows two BPX nodes in a BPX network in which each of these two nodes is connected to
an MGX 8220 shelf via a BNI card. User Frame Relay equipment, located at “A,” is attached to one of
the MGX 8220 shelves via a port on the shelf’s FRSM card. User Frame Relay equipment, located at
H8272