Filter
Top Products
5-16
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Configuring IMATM Connections
Sample Display
LineNum: 1
LineAlarmState: No Alarms
LineStatisticalAlarmState: Alarm(s) On --
UAS24hrAlarm
The dspalm display shows that there is an UAS statistical alarm on ds3. To see exactly which statistical
alarm occurred, enter the following command:
AXIS18.1.9.IMATM.a > dspalmcnt -ds3 1
Sample Display
AXIS18.1.9.IMATM.a > dspalmcnt "-ds3 1"
LineNum: 1
LCVCurrent: 0
LCVLast15minBucket: 0
LCVLast24hrBucket: 0
LESCurrent: 0
LESLast15minBucket: 0
LESLast24hrBucket: 0
LSESCurrent: 0
LSESLast15minBucket: 0
LSESLast24hrBucket: 0
PCVCurrent: 0
PCVLast15minBucket: 0
PCVLast24hrBucket: 0
PESCurrent: 0
PESLast15minBucket: 0
PESLast24hrBucket: 0
PSESCurrent: 0
PSESLast15minBucket: 0
PSESLast24hrBucket: 0
SEFSCurrent: 0
SEFSLast15minBucket: 0
SEFSLast24hrBucket: 0
AISSCurrent: 0
AISSLast15minBucket: 0
AISSLast24hrBucket: 34
UASCurrent: 0
UASLast15minBucket: 0
UASLast24hrBucket: 3540
PercentEFS: 100
Type <CR> to continue, Q<CR> to stop:
RcvLOSCount: 1
RcvOOFCount: 0
RcvRAICount: 18
RcvCCVCount: 0
RcvFECount: 0
The display above shows that there was an AIS 34 times in last 24 hours. The best way to see the alarm
is clear the alarm and see it.
To see the dsx3 line parameter, enter the following command:
AXIS18.1.9.IMATM.a > dspdsx3ln 1