Filter
Top Products
5-3
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
addannpermanent
addannpermanent
To configure an announcement server file and associated codec type as permanent, use the
addannpermanent command in the VoIP switching operating mode.
addannpermanent ann-index ann-filename ann-codec-type
Syntax Description
Command Modes VoIP switching
Usage Guidelines The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples The following example shows that index server number 19 is configured with the femalezero1 file in the
G.726-40K codec:
addannpermanent 19 femalezero1 9
ann-index Announcement file server index number which you assign to identify a
permanent announcement server file. It can be in the range from 1 to 125.
ann-filename Announcement filename. It can be from 1 to 64 alphanumeric characters,
including the following symbols—period (.), forward slash (/), underscore
(_), and hyphen (-).
ann-codec-type Announcement filename associated codec. It can be one of the following
values:
• 1 = G.711u
• 2 = G.711a
• 3 = G.726-32k
• 4 = G.729a
• 5 = G.729ab
• 7 = G.726-16k
• 8 = G.726-24k
• 9 = G.726-40k
• 11 = G.723-H
• 12 = G.723.1a-H
• 13 = G.723.1-L
• 14 = G.723.1a-L