Filter
Top Products
5-334
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcons
dspcons
To display channel configuration data for all configured connections on a VISM card, use the dspcons
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspcons
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that channel configuration data for all connections on the current VISM
card are displayed:
dspcons
ConnId ChanNum Status Preference Protection Active Locking
------- ------- ------ ---------- ---------- ------- --------
datamvr2.5.1.0.135 135 Add 1 unprotected unknown unlock
datamvr2.5.1.0.136 136 Add 1 unprotected unknown unlock
ChanNumNextAvailable: 137
Related Commands Command Description
addcon Adds a PVC connection between a VISM card and any SM or PXM card.
cnfcon Configures a connection between a VISM card and a Cisco MGX 8000 Series
platform PXM card.
dspcon Displays the parameters for a specified channel.