Filter
Top Products
5-472
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspxgcpdetailcnts
dspxgcpdetailcnts
To display Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP) details
of message statistics exchanged between VISM and all known call agents, use the dspxgcpdetailcnts
command in the VoIP switching/trunking operating mode.
dspxgcpdetailcnts
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SGCP/MGCP details of message statistics exchanged between
VISM and all known call agents are displayed:
dspxgcpdetailcnts
IP Address : 2.2.2.2
CRCX Count : 0
CRCX Fail Count : 0
MDCX Count : 0
MDCX Fail Count : 0
DLCX Received Count : 0
DLCX Received Fail Count : 0
DLCX Sent Count : 0
DLCX Sent Fail Count : 0
RQNT Count : 0
RQNT Fail Count : 0
Notify Count : 0
Notify Fail Count : 0
Audit Endpoint Count : 0
Audit Endpoint Fail Count : 0
Audit Connection Count : 0
Audit Connection Fail Count : 0
RSIP Count : 4
RSIP Fail Count : 4
Related Commands Command Description
dspxgcpdetailcnt Displays SGCP/MGCP details of message statistics exchanged between VISM
and a specified call agent.