5-419
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspsarcnt
dspsarcnt
To display the segmentation and reassembly (SAR) counter values for a specified channel, use the
dspsarcnt command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspsarcnt lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SAR counter values for logical channel number 132 are displayed:
dspsarcnt 132
SarShelfNum: 1
SarSlotNum: 17
SarChanNum: 132
Tx Rx
--------------- ---------------
Total Cells: 69486 60243
Total CellsCLP: 0 0
Total CellsAIS: 0 0
Total CellsFERF: 0 0
Total CellsEnd2EndLpBk: 0 0
Total CellsSegmentLpBk: 0 0
RcvCellsDiscOAM: 2151467320
Related Commands
lcn Logical channel number of the connection for which you want to display SAR
counter values; in the range from 131 to 510.
Command Description
dspsarcnts Displays the SAR counter values for a VISM card.