5-259
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
delln
delln
To delete a DS1 line on a VISM card, use the delln command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
delln ds1-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines You must delete endpoints and CCS channels from the line before the line can be deleted.
Examples The following example shows that line number 4 is deleted:
delln 4
Related Commands
ds1-num Physical line number in the range from 1 to 8.
Command Description
addln Adds a T1 or E1 line to a VISM card.
cnfln Configures characteristics for a VISM card line.
dspln Displays the characteristics of a specified VISM card line.
dsplns Displays the characteristics for all lines on a VISM card.