Filter
Top Products
4-2
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 4 Configuring VISM Features
Connecting to Cisco MGX 8000 Series Platforms
VISM Command Attributes
Use the information in Table 4-1 to determine the log file attributes, VISM card state requirements for
command use, and personnel privileges for all VISM commands.
Note For a complete description of the CLI commands in this chapter, see Chapter 5, “CLI Commands.”
Connecting to Cisco MGX 8000 Series Platforms
The VISM card operates in the following MGX 8000 Series platforms:
• Cisco MGX 8850 Release 1, wide area switch
• Cisco MGX 8250, edge concentrator
• Cisco MGX 8230, edge concentrator
Each platform contains a Processor Module (PXM) back card (see Figure 4-1). Connect your CLI
command administration terminal or workstation to the PXM back card’s control port—locally or
remotely through a modem.
Note The MGX 8000 Series platform PXM back card contains all connections for managing VISM cards.
The VISM card itself has no physical management ports.
Table 4-1 VISM Command Attributes—Log File, Card State, and Privilege Level
Commands that
begin with...
...write to the
log file?
...are usable in
what state?
...can be used by personnel
with what privilege level?
?
1
1. The text shown represents the complete CLI command name.
No All All
add Yes Active 1
cc
1
Yes All All
chkflash
1
Yes Active 1
clr No Active 1 to 5
cnf Yes Active 1
del Yes Active 1
dsp No Active All
Help
1
No All All
pinglndsp
1
No Active All
tst No Active All
version
1
No Active All