Filter
Top Products
5-163
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnflapdwinsize
cnflapdwinsize
To configure a maximum number of outstanding (unacknowledged) I-frames, use the cnflapdwinsize
command in the VoIP switching/trunking operating mode.
cnflapdwinsize line-num ds0-num iframe-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that line 2, DS0 12 is configured with an LAPD window size of 10—a
maximum number of 10 I-frames can be accumulated before sending an acknowledgment:
cnflapdwinsize 2 12 10
Related Commands
line-num Line number of the D channel to be configured. In the range from 1 to 8.
ds0-num DS0 number that was specified in the addlapd command. It can be a value from one
of the following ranges:
• 1 to 24 for T1 lines
• 1 to 31 for E1 lines
iframe-num Maximum number of outstanding (unacknowledged) I-frames that can be
accumulated before sending an acknowledgment. It can be in the range from 1 to 127.
Command Description
cnflapdretrans Configures a maximum number of frame retransmissions for a previously added
LAPD.
cnflapdtimer Configures two LAPD timers for a previously added LAPD.
cnflapdtype Configures the various types of LAPD stacks for a previously added LAPD.