Filter
Top Products
5-328
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcodecparams
dspcodecparams
To display codec parameters, use the dspcodecparams command in the VoIP switching/trunking
operating mode.
dspcodecparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines The following data, codec parameters, are displayed when you use this command:
• Codec type
• xGCP codec string
• Packetization period
• Preference
• IANA registered codec type
Note Because the preference of any codec can be configured regardless of the current codec template, all
codecs displayed by this command may not be available in the current codec template.
Examples The following example shows that the codec parameters are displayed:
dspcodecparams
codecType codecString pktPeriod (ms) Preference ianaCodecType
------------- ----------- -------------- ----------- -------------
1 - G.711u PCMU 10 7 0
2 - G.711a PCMA 10 8 8
3 - G.726-32K G.726-32 10 5 2
4 - G.729a G729a 10 2 96
5 - G.729ab G729ab 10 1 96
6 - clr chan CCD 10 9 96
7 - G.726-16K G.726-16 10 3 96
8 - G.726-24K G.726-24 10 4 96
9 - G.726-40K G.726-40 10 6 96
Related Commands Command Description
cnfcodectmpl Assigns a codec template to a VISM card.
dspcodectmpls Displays all entries in the codec template table.