5-74
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfalmcnt
• CRC code violations encountered by the interface.
• CRC code violations in the last 15 minutes encountered by the interface.
• CRC code violations in the last 24 hours encountered by the interface.
• CRC code violated Errored Seconds encountered by the interface.
• CRC code violated Errored Seconds in the last 15 minutes encountered by the interface.
• CRC code violated Errored Seconds in the last 24 hours encountered by the interface.
• P Bit code violations Severely Errored Seconds encountered by the interface.
• CRC code violated Severely Errored Seconds in the last 15 minutes encountered by the interface.
• CRC code violated Severely Errored Seconds in the last 24 hours encountered by the interface.
• Severely Errored Framing Seconds encountered by the interface.
• Severely Errored Framing Seconds in the last 15 minutes encountered by the interface.
• Severely Errored Framing Seconds in the last 24 hours encountered by the interface.
• AIS Severely Errored Seconds encountered by the interface.
• AIS Severely Errored Seconds in the last 15 minutes encountered by the interface.
• AIS Severely Errored Seconds in the last 24 hours encountered by the interface.
• Unavailable Seconds encountered by the interface.
• Unavailable Seconds in the last 15 minutes encountered by the interface.
• Unavailable Seconds in the last 24 hours encountered by the interface.
• Percentage of LCV Error Free Seconds.
• Loss of Signal detected with or without integrating to LOS alarm.
• Out of Frame detected with or without integrating to OOF alarm.
• Yellow Alarms detected with or without integrating to RAI alarm.
• Framing Pattern Errors encountered by a DS1 interface.
Examples The following example shows that the TDM line statistics for major alarms are collected for line number
7:
cnfalmcnt -ds1 7 -sev 2
Related Commands Command Description
dspalmcnf Displays the threshold data about the alarm statistics being collected.
dspalmcnt Displays the alarm counters and statistics on a line.