5-9
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
addcid
codec-type The type of coding/decoding to be performed on the data stream. It can be one of
the following values:
• 1 = G.711u
• 2 = G.711a
• 3 = G.726-32k
• 4 = G.729a
• 5 = G.729ab
• 6 = Clear channel (VAD must be off)
• 7 = G.726-16k
• 8 = G.726-24k
• 9 = G.726-40k
• 11 = G.723-H
• 12 = G.723a-H
• 13 = G.723.1-L
• 14 = G.723.1a-L
profile-type (Optional) The profile type to be used for the CID. It can be one of the following
values:
• 1 = International Telecommunication Union (ITU) I.366.2
• 3 = Custom
Note If profile-type and profile-num argument values are both 1, you cannot turn
VAD on.
profile-num (Optional) Number of the profile. It can be one of the following values:
• 1 = ITU profile type
• 2 = ITU profile type
• 3 = ITU profile type
• 7 = ITU profile type
• 8 = ITU profile type
• 12 = ITU profile type
• 100 = custom profile types
• 101 = custom profile types
• 110 = custom profile types
• 200 = custom profile types
|vad-enable| (Optional) Enables or disables voice activity detection (VAD). It can be one of the
following values:
1 = On
2 = Off
Note If you type 1 for both the profile-type and profile-num argument values,
VAD cannot be turned on.