5-458
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspvoipparams
dspvoipparams
To display the VoIP switching/trunking operating mode parameters, use the dspvoipparams command
in the VoIP switching/trunking operating mode.
dspvoipparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines The following parameters are displayed when you use this command:
• DTMF relay status—Displays whether the CAS bits are configured to be relayed to the other
endpoint.
• CAS bits transport status—Displays whether the DTMF tones are configured to be relayed to the
other endpoint.
• VAD timer value—Displays the hangover time before silence compression is invoked.
• Event negotiation policy—None, proprietary, or all.
• Silence insertion descriptor (SID) payload type.
Examples The following example shows that the VoIP switching/trunking operating mode parameters are
displayed:
dspvoipparams
VoIP DTMF RELAY: Off
VoIP CAS BITS TRANSPORT: Off
VoIP VAD TIMER: 250
VoIP EVENT NEGOTIATE POL: proprietary
VoIP SID PAYLOAD TYPE: 13
Related Commands Command Description
cnfvoiptimerparam Configures the holdover time for VAD before silence compression is
activated.
cnfvoiptransparams Configures the VoIP transportation parameters.