Filter
Top Products
5-106
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfcaspackage
in-package Package name to be used for persistent events observed on an incoming
telephony call. It can be one of the following values:
• MS = PBX DID/DOD trunks and incoming or outgoing MF wink start
trunks
• DT = DTMF and dial pulse
1
trunks (except basic PBX)
• MD = North American MF Feature Group D EANA and EAIN
• MO = FGD Operator Services Signaling outgoing trunks only
• BL = DTMF and dial pulse
1
basic PBX trunks
• L = Line
• H = Handset
• Basic = It can be one of the following:
–
G—generic
–
D—DTMF
–
M—MF
–
T—Trunk
–
L—Line
–
H—Handset
–
R—RTP
–
A—Announcement Server
–
Script—Script
Note If you set the package to anything other than basic on an endpoint with
this command, persistent events observed on that endpoint are encoded
as an event in that package if the event is defined in that package, or
dropped if they are not defined in that package. Packages N and S are
not supported.