Filter
Top Products
5-413
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dsprtpcons
dsprtpcons
To display the configuration data of all static Real-Time Transport Protocol (RTP) VoIP trunking
connections, use the dsprtpcons command in the VoIP switching/trunking and VoIP and switched ATM
AAL1 SVC operating modes.
dsprtpcons
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all static RTP connections are displayed:
dsprtpcons
Connection Endpoint Local Rtp Remote RTP Remote IP Codec Packetization Alarm
Index Number Port Port Address Type Period State
---------- -------- --------- ---------- --------------- ----- ------------- ----------
1 1 49700 49700 209.165.200.224 G711u ten Active
2 2 49702 49702 209.165.200.225 G.711u ten Active
Related Commands Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflapdtrunkpvc Assigns the PVC trunk type that carries LAPD messages for the current VISM
card.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.