Filter
Top Products
5-75
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfannagetime
cnfannagetime
To configure the time that a nonpermanent announcement is to remain valid after it is placed into the
VISM announcement cache, use the cnfannagetime command in the VoIP switching operating mode.
cnfannagetime nonpann-age-time
Syntax Description
Command Modes VoIP switching
Usage Guidelines When a nonpermanent announcement enters the announcement cache, it remains valid, as is, until the
time you select for the nonpann-age-time argument value expires. When the time expires, the
nonpermanent announcement is refreshed from the announcement file server. Requests to play a
nonpermanent announcement do not affect its age time or cause the file to be refreshed.
Examples The following example shows that nonpermanent announcements are configured to expire two hours
after being placed into the VISM announcement cache:
cnfannagetime 120
Related Commands
nonpann-age-time Nonpermanent announcement age time (defined in minutes). It can be in the
range from 0 to 65535.
Note 0 = Infinite amount of time; the nonpermanent announcement remains
valid until you replace it, if necessary.
Command Description
addannpermanent Configures an announcement server file and associated codec type as
permanent.
cnfanndn Designates an announcement file server domain name.
cnfannpathprefix Designates the main prefix directory TFTP path from which to retrieve
announcement files from the announcement file server.
cnfannprefcodec Configures the codec type used for announcements played on unconnected
TDM endpoints.
cnfannreqtimeout Configures the expiration time for announcements to begin playing after the
VISM receives the announcement signal (request) from the call agent.
delannalldynamic Deletes all announcement files and their associated codec types from the
temporary announcement files currently saved in the VISM card.
delanndynamic Deletes an announcement file and associated codec type from the temporary
announcement files currently saved in the VISM card.
delannpermanent Deletes a permanent announcement file and its associated codec type from the
announcement file server.
dspannagetime Displays the time that a nonpermanent announcement is to remain valid after
it is placed into the VISM announcement cache.