Filter
Top Products
5-40
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
addrudptrunk
addrudptrunk
To add an ISDN PRI backhaul Reliable User Datagram Protocol (RUDP) session for a Link Access
Protocol D channel (LAPD) trunk connection, use the addrudptrunk command in the VoIP
switching/trunking operating mode.
addrudptrunk session-num lport-num rport-num remote-ip-addr
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the ISDN PRI backhaul RUDP session number 40 is added to the
LAPD trunk connection with local port 1024, remote port 2006, and remote IP address 209.165.200.244:
addrudptrunk 40 1024 2006 209.165.200.244
Related Commands
session-num Identifying session number in the range from 1 to 64.
lport-num Local port number. It can be in the range from 1124 to 49151.
rport-num Remote port number. It can be in the range from 1124 to 49151.
remote-ip-addr IP address of the remote VISM card, in dotted decimal format
(nnn.nnn.nnn.nnn).
Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflapdtrunkpvc Assigns the PVC trunk type that carries LAPD messages for the current VISM
card.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.