5-349
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspgain
dspgain
To display the adjustable gain for a specified VISM card, use the dspgain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspgain
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the adjustable gain values for the current VISM card are displayed:
dspgain
LineNo/Ds0No InputGain OutputAttenuation
------------ --------- -----------------
1/1 0 100
1/2 10 60
.
.
.
Related Commands Command Description
cnfds0gain Configures the adjustable gain for a specified DS0.
cnfgain Configures the adjustable gain for a VISM card.
cnflngain Configures the adjustable gain for all DS0s on a specified VISM card line.
dspds0gain Displays the adjustable gain values for a specified DS0.
dsplngain Displays the adjustable gain for a specified VISM card line.