5-323
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcds
dspcds
To display a list of chassis card types, with associated slot numbers, card status, alarm status, and
redundancy status, use the dspcds command in the VoIP switching/trunking, switched AAL2 PVC, and
AAL2 trunking operating modes.
dspcds
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the list of chassis card types, with associated status data, are
displayed:
dspcds
Slot CardState CardType CardAlarm Redundancy
---- --------- -------- --------- ----------
1.1 Empty Clear
1.2 Active VISM-8T1 Clear
.
.
.
1.32 Active VISM-8E1 Clear
Related Commands Command Description
dspcd Displays the current VISM card’s configuration, status, and hardware and firmware
configuration data.
version Displays version-related information for a VISM card.