5-191
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfprofelemvoice
cnfprofelemvoice
To configure the profile voice element, use the cnfprofelemvoice command in the switched AAL2 PVC
operating mode.
cnfprofelemvoice profile-type profile-num codec-type pvoice-pkt-period sid
Syntax Description profile-type The profile type to be used for the CID. It can be one of the following values:
• 1 = International Telecommunication Union (ITU) I.366.2
• 3 = Custom
profile-num Number of the profile. It can be one of the following values:
• 1 = ITU profile type
• 2 = ITU profile type
• 3 = ITU profile type
• 7 = ITU profile type
• 8 = ITU profile type
• 12 = ITU profile type
• 100 = custom profile type
• 101 = custom profile type
• 110 = custom profile type
• 200 = custom profile type
codec-type The type of coding/decoding to be performed on the data stream. It can be one of
the following values:
• 1 = G.711u
• 2 = G.711a
• 3 = G.726-32k
• 4 = G.729a
• 5 = G.729ab
• 6 = Clear channel (VAD must be off)
• 7 = G.726-16k
• 8 = G.726-24k
• 9 = G.726-40k
• 11 = G.723.1-H
• 12 = G.723.1a-H
• 13 = G.723.1-L
• 14 = G.723.1a-L