5-315
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcasvar
dspcasvar
To display data about channel associated signaling (CAS) variants for a given variant name, use the
dspcasvar command in the VoIP switching/trunking operating mode.
dspcasvar var-name
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command
Examples The following example shows that the CAS variant data for the CAS variant identified by the name first
is displayed:
dspcasvar first
CasVariantName: first
CasFileName: wink.dod
Ringing time: 30
Digit method: DTMF
Partial dial timing: 16
Critical dial timing: 4
Interdigit timeout: 1
CasVariantState: configured
CasRowStatus: Add
Country code: US
Related Commands
var-name Name of the CAS variant; a text string of 1 to 64 alphanumeric characters.
Command Description
addcasvar Adds a CAS variant to a VISM card.
cnfcasvar Configures CAS variant and CAS timing parameters for a variant already created
with the addcasvar command.
delcasvar Deletes a CAS variant.