5-188
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfpncon
cnfpncon
To set priority routing for a specified connection, use the cnfpncon command in the switched AAL1
SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2 trunking, and switched ATM AAL1 SVC
operating modes.
cnfpncon lcn route-priority
Syntax Description
Command Modes Switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2 trunking, and switched ATM
AAL1 SVC
Usage Guidelines The Private Network-to-Network Interface (PNNI) routing priority feature requires you to use a PXM1E
or PXM45 in your MGX 8000 Series switch chassis.
Examples The following example shows that the priority routing for connection 145 is set to the lowest priority:
cnfpncon 145 15
Related Commands
lcn The logical channel number. It can be in the range from 131 to 510.
route-priority Route priority. It can be in the range from 1 to 15 (lowest). (Default = 8)
Command Description
dspcon Displays the parameters for a specified channel.