Filter
Top Products
5-314
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcastimers
Related Commands Command Description
addxgcppersistevt Adds persistent xGCP events.
cnfcasdialdelay Configures the VISM wait time (dial delay) for outpulsing digits to the PBX
after sending an off-hook event.
cnfcasflashtime Configures the minimum and maximum CAS on-hook time periods for
incoming flash hooks on a specified endpoint.
cnfcasglareattrib Configures the direction of CAS calls and the glare policy for a specified
endpoint.
cnfcasguardtime Configures the CAS guard time for an endpoint.
cnfcasoffhooktime Configures a minimum presence time, on an endpoint, for a CAS off-hook
pattern to be recognized as an off-hook signal.
cnfcasonhooktime Configures a minimum presence time, on an endpoint, for a CAS on-hook
pattern to be recognized as an on-hook signal.
cnfcaspackage Configures MGCP packages to notify persistent observed CAS events in the
context of incoming and outgoing CAS calls on a specified endpoint.
dspcasglareattrib Displays the direction of CAS calls and the glare policy for a specified
endpoint.
dspcaspackage Displays the MGCP packages configured to notify persistent observed CAS
events in the context of incoming and outgoing CAS calls on a specified
endpoint.