Filter
Top Products
5-322
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspcd
dspcd
To display the current VISM card’s configuration, status, and hardware and firmware configuration data,
use the dspcd command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspcd
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines The VISM card configuration data displayed includes serial number and hardware and firmware revision
levels.
Examples The following example shows that the current VISM card configuration data is displayed:
dspcd
ModuleSlotNumber: 17
FunctionModuleState: Active
FunctionModuleType: VISM-8T1
FunctionModuleSerialNum: xxxxxxxxxx
FunctionModuleHWRev: 0.0
FunctionModuleFWRev: 1.5.0_11Nov01_2
FunctionModuleResetReason: ?
LineModuleType: LM-RJ48-8T1
LineModuleState: Present
mibVersionNumber: 21
configChangeTypeBitMap: CardCnfChng, LineCnfChng
pcb part no - (800 level): 800-xxxxx-xx
pcb part no - (73 level): 73-xxxxx-xx
Fab Part no - (28 level): 28-xxxxx-xx
PCB Revision: 08
Daughter Card Information:
Daughter Card Serial Number: xxxxxxxxxxx
pcb part no - (73 level): 73-xxxxx-xx
Fab Part no - (28 level): 28-xxxxx-xx
PCB Revision: 04
Related Commands Command Description
dspcds Displays a list of chassis card types, with associated slot numbers, card status, alarm
status, and redundancy status.
version Displays version-related information for a VISM card.