5-24
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
addendpts
This command sends an RSIP message to each associated call agent indicating that the endpoints are in
service.
Examples The following example shows that 12 consecutive endpoints are added to line 1, starting at endpoint
number 6, DS0 number 12:
addendpts 6 1 12 12
Related Commands Command Description
delendpts Deletes a consecutive number of endpoints on the VISM card.
dspendpts Displays information about all endpoints on a VISM card.