5-277
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
delxgcpcon
delxgcpcon
To delete an xGCP connection specified by the xGCP connection identification number, use the
delxgcpcon command in the VoIP switching/trunking and switched AAL2 PVC operating mode.
delxgcpcon conn-id
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the connection represented by the hexadecimal connection
identification B is configured for gateway-initiated DLCX commands:
delxgcpcon b
Related Commands
conn-id Connection identification number. It can be in the range of hexadecimal numbers
from 0 to f.
Command Description
dspxgcpcon Displays the attributes associated with a call agent established connection.
dspxgcpcons Displays the xGCP connection ID, endpoint name, and call ID corresponding to each
call agent established connection on the gateway.