Juniper Networks J-Series Network Router User Manual


 
Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Corresponding CLI CommandsFunctionMonitor Option
Interfacesshow mpls interface
LSP informationshow mpls lsp
LSP Statisticsshow mpls lsp
statistics
RSVP Sessionsshow rsvp session
RSVP Interfacesshow rsvp
interface
Displays information about MPLS label-switched paths (LSPs) and
virtual private networks (VPNs) through the following options:
InterfacesInformation about the interfaces on which MPLS
is enabled, including operational state and any administrative
groups applied to an interface.
LSP InformationInformation about LSP sessions currently
active on the Services Router, including inbound (ingress) and
outbound (egress) addresses, LSP state, and LSP name.
LSP StatisticsStatistics for LSP sessions currently active on
the Services Router, including the total number of packets
and bytes forwarded through an LSP.
RSVP SessionsInformation about RSVP-signaled LSP
sessions currently active on the Services Router, including
inbound (ingress) and outbound (egress) addresses, LSP state,
and LSP name.
RSVP InterfacesInformation about the interfaces on which
RSVP is enabled, including the interface name, total
bandwidth through the interface, and total current reserved
and reservable (available) bandwidth on the interface.
For details, see Monitoring MPLS Traffic Engineering
Information on page 130.
MPLS
show services service-sets
summary
show services service-sets
memory-usage
Displays information about configured service sets.
For details, see Monitoring Service Sets on page 135.
Service Sets
Stateful firewall information
show services stateful-firewall
conversations
show services stateful-firewall
flows
IDS information
show services ids
destination-table
show services ids source-table
show services ids pair-table
Displays firewall and intrusion detection service (IDS) information
through the following options:
Stateful FirewallDisplays the stateful firewall configuration.
IDS InformationDisplays information about the configured
IDS.
For details, see Monitoring Firewalls on page 136.
Firewall
show services ipsec-vpn ipsec
statistics
show services ipsec-vpn ipsec
security-associations
show services ipsec-vpn ike
security-associations
Displays configured IPSec tunnels and statistics, and IKE security
associations.
For details, see Monitoring IPSec Tunnels on page 140.
IPSec
show services nat pool
Displays configured NAT pools.
For details, see Monitoring NAT Pools on page 142.
NAT
104 Monitoring Overview
J-series Services Router Administration Guide