Filter
Top Products
■
show tgm dynamic-call-admission-control
■
show tgm fpc slot-number media-gateway-controller
■
show tgm fpc slot-number dsp-capacity
■
show tgm telephony-interace-module status
Table 79 on page 152 summarizes key output fields in media gateway information
displays.
Table 79: Summary of Key Media Gateway Information Output Fields
Additional InformationValuesField
Dynamic Call Admission Control Information
If dynamic CAC is configured on more than one
active interface, the TGM550 reports the bearer
bandwidth limit (BBL) of the active interface with
the highest activation priority.
If more than one active interface has the same
activation priority, the BBL is reported as the
number of those interfaces times their lowest BBL.
For example if two interfaces with the same
activation priority have BBLs of 2000 Kbps and
1500 Kbps, the RBBL is 3000 Kbps (2 x 1500
Kbps).
Maximum bandwidth available for voice traffic
on the Services Router.
Reported Bearer
Bandwidth Limit
Name of interface on which dynamic CAC is
configured.
(See the interface naming conventions in the
J-series Services Router Basic LAN and WAN Access
Configuration Guide.)
Interface Name
The operational state is the physical state of the
interface. If the interface is physically operational,
even if it is not configured, the operational state
is Up. An operational state of Down indicates a
problem with the physical interface.
Link state of the interface: Up or Down.
State
Activation priority configured on the interface.Activation Priority
Maximum bandwidth available for voice traffic
on the interface.
Bearer Bandwidth
Limit (Kbps)
Telephony Gateway Module Information
IP addresses of the MGCs configured in the MGC
list for the TGM550.
Media Gateway
Controller (MGC) List
Online and offline status of the telephony interface
modules (TIMS).
Slot state
Reason for offline status: Busy Out or Out of
resources.
Offline Reason
152 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide