Juniper Networks J-Series Network Router User Manual


 
Creating a Remote Template Account
You can create a remote template that is applied to users authenticated by RADIUS
or TACACS+ that do not belong to a local template account.
By default, the JUNOS software uses the remote template account when
The authenticated user does not exist locally on the Services Router.
The authenticated user's record in the RADIUS or TACACS+ server specifies
local user, or the specified local user does not exist locally on the router.
The procedure provided in this section creates a sample user named remote that
belongs to the operator login class.
To create a remote template account:
1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
2. Perform the configuration tasks described in Table 16 on page 19.
3. If you are finished configuring the network, commit the configuration.
To completely set up RADIUS or TACACS+ authentication, you must configure
at least one RADIUS or TACACS+ server and specify a system authentication
order.
4. Go on to one of the following procedures:
To configure a RADIUS server, see Setting Up RADIUS
Authentication on page 12.
To configure a TACACS+ server, see Setting Up TACACS+
Authentication on page 13.
To specify a system authentication order, see Configuring Authentication
Order on page 15.
Table 16: Creating a Remote Template Account
CLI Configuration EditorJ-Web Configuration EditorTask
From the [edit] hierarchy level,
enter
edit system login
1.
In the J-Web interface, select
Configuration>View and Edit>Edit
Configuration.
2.
Next to System, click Configure or Edit.
3.
Next to Login, click Configure or Edit.
Navigate to the System Login
level in the configuration
hierarchy.
Set the username and the login
class for the user:
set user remote class operator
1.
Next to User, click Add new entry.
2.
In the User name box, type remote.
3.
In the Class box, type operator.
4.
Click OK.
Create a user named remote who
belongs to the operator login class.
Managing User Authentication with a Configuration Editor 19
Chapter 1: Managing User Authentication and Access