Juniper Networks J-Series Network Router User Manual


 
Creating a Local Template Account
You can create a local template that is applied to users authenticated by RADIUS or
TACACS+ that are assigned to the local template account. You use local template
accounts when you need different types of templates. Each template can define a
different set of permissions appropriate for the group of users who use that template.
The procedure provided in this section creates a sample user named admin that
belongs to the superuser login class.
To create a local template account:
1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
2. Perform the configuration tasks described in Table 17 on page 20.
3. If you are finished configuring the network, commit the configuration.
To completely set up RADIUS or TACACS+ authentication, you must configure
at least one RADIUS or TACACS+ server and specify a system authentication
order
4. Go on to one of the following procedures:
To configure a RADIUS server, see Setting Up RADIUS
Authentication on page 12.
To configure a TACACS+ server, see Setting Up TACACS+
Authentication on page 13.
To configure a system authentication order, see Configuring Authentication
Order on page 15.
Table 17: Creating a Local Template Account
CLI Configuration EditorJ-Web Configuration EditorTask
From the [edit] hierarchy level,
enter
edit system login
1.
In the J-Web interface, select
Configuration>View and Edit>Edit
Configuration.
2.
Next to System, click Configure or Edit.
3.
Next to Login, click Configure or Edit.
Navigate to the System Login
level in the configuration
hierarchy.
Set the username and the login
class for the user:
set user admin class superuser
1.
Next to User, click Add new entry.
2.
In the User name box, type admin.
3.
In the Class box, type superuser.
4.
Click OK.
Create a user named admin who
belongs to the superuser login
class.
20 Managing User Authentication with a Configuration Editor
J-series Services Router Administration Guide