Juniper Networks J-Series Network Router User Manual


 
Table 76: Summary of DHCP Output Fields (continued)
Additional InformationValuesField
DHCP servers can assign a dynamic binding from a pool
of IP addresses or a static binding to one or more
specific IP addresses.
Type of binding assigned to the client: dynamic or
static.
Binding
Type
Date and time the lease expires, or never for leases
that do not expire.
Lease
Expires
DHCP Conflicts
Date and time the client detected the conflict.Detection
Time
Only client-detected conflicts are displayed.How the conflict was detected.Detection
Method
The addresses in the conflicts list remain excluded until
you use the clear system services dhcp conflict command
to manually clear the list.
IP address where the conflict occurs.Address
DHCP Pools
Subnet on which the IP address pool is defined.Pool Name
Lowest address in the IP address pool.Low
Address
Highest address in the IP address pool.High
Address
Addresses excluded from the address pool.Excluded
Addresses
DHCP Statistics
Lease time assigned to clients that do not request a
specific lease time.
Default
lease time
Minimum time a client can retain an IP address lease
on the server.
Minimum
lease time
Maximum time a client can retain an IP address lease
on the server.
Maximum
lease time
Total number of packets dropped and the number of
packets dropped due to a particular condition.
Packets
dropped
Number of BOOTREQUEST, DHCPDECLINE,
DHCPDISCOVER, DHCPINFORM, DHCPRELEASE,
and DHCPREQUEST messages sent from DHCP clients
and received by the DHCP server.
Messages
received
Number of BOOTREPLY, DHCPACK, DHCPOFFER,
and DHCPNAK messages sent from the DHCP server
to DHCP clients.
Messages
sent
144 Using the Monitoring Tools
J-series Services Router Administration Guide