Juniper Networks J-Series Network Router User Manual


 
Table 73 on page 140 summarizes key output fields for stateful firewall filter intrusion
detection.
Table 73: Summary of Key Firewall IDS Output Fields
ValuesField
Source address for the event.Source Address
Destination address for the event.Destination address
Total time the information has been in the IDS table.Time
Total number of bytes sent from the source to the destination address, in thousands (k) or millions
(m).
Bytes
Total number of packets sent from the source to the destination address, in thousands (k) or millions
(m).
Packets
Total number of flows of packets sent from the source to the destination address, in thousands (k)
or millions (m).
Flows
Total number of anomalies in the anomaly table, in thousands (k) or millions (m).
Anomalies
Configured application, such as FTP or Telnet.Application
Monitoring IPSec Tunnels
IPSec tunnel information includes information about active IPSec tunnels configured
on the Services Router, as well as traffic statistics through the tunnels. To view IPSec
tunnel information, select Monitor>IPSec in the J-Web interface, or enter the
following CLI show commands:
show services ipsec-vpn ipsec statistics
show services ipsec-vpn ipsec security-associations
show services ipsec-vpn ike security-associations
Table 74 on page 140 summarizes key output fields in IPSec displays.
Table 74: Summary of Key IPSec Output Fields
ValuesField
IPSec Tunnels
Name of the service set for which the IPSec tunnel is defined.Service Set
Name of the rule set applied to the IPSec tunnel.Rule
Name of the IPSec term applied to the IPSec tunnel.Term
Gateway address of the local system.Local Gateway
140 Using the Monitoring Tools
J-series Services Router Administration Guide