Juniper Networks J-Series Network Router User Manual


 
Table 93: Summary of Key Alarm Output Fields (continued)
Additional InformationValuesField
Date and time when the alarm condition was
detected.
Received at
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance.
Alarm severityeither major (red) or minor (yellow).Severity
Clicking the alarm subject displays a detailed alarm
message.
Brief synopsis of the alarm.Subject
Detailed Alarm Message
Date and time when the failure was detected.Received at
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance.
Alarm severityeither major (red) or minor (yellow).Severity
Category of the alarm:
ChassisIndicates an alarm condition on the
chassis (typically an environmental alarm such
as temperature)
ConfigurationIndicates that no rescue
configuration is set
ETHERIndicates an alarm condition on an
Ethernet interface
DS3Indicates an alarm condition on a DS3
interface
LicenseIndicates a software license
infringement
SerialIndicates an alarm condition on a serial
interface
ServicesIndicates an alarm condition on the
services module
Alarm Type
Verifying the Alarms Configuration
To verify alarms configuration, perform the following task.
Displaying Alarm Configurations
Purpose Verify the configuration of the alarms.
Action From the J-Web interface, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the show chassis alarms command.
[edit]
user@host# show chassis alarms
t3 {
Verifying the Alarms Configuration 175
Chapter 9: Configuring and Monitoring Alarms