Juniper Networks J-Series Network Router User Manual


 
Table 48: Summary of Key System Properties Output Fields (continued)
Additional InformationValuesField
Hostname of the Services Router, as defined with the
set system hostname command.
Router
Hostname
IP address, in dotted decimal notation, of Ethernet
management port 0 (ge-0/0/0, for example), as
defined with the set interfaces ge-0/0/0 command.
Router IP
Address
IP address, in dotted decimal notation, of the loopback
address, as defined with the set interfaces lo0
command.
Loopback
Addresses
IP addresses, in dotted decimal notation, of the
domain name servers, as defined with the set system
name-server command.
Domain
Name
Servers
Time zone of the Services Router, as defined with the
set system time-zone command.
Time Zone
System Time
Current system time, in Coordinated Universal Time
(UTC).
Current
Time
Date and time when the router was last booted and
how long it has been running.
System
Booted
Time
Date and time when the routing protocols were last
started and how long they have been running.
Protocol
Started
Time
Date and time when a configuration was last
committed. This field also shows the name of the user
who issued the last commit command, through either
the J-Web interface or the CLI.
Last
Configured
Time
Users
Username of any user logged in to the Services Router.User
Terminal through which the user is logged in.TTY
System from which the user has logged in. A hyphen
indicates that the user is logged in through the console.
From
This is the LOGIN@ field in show system users command
output.
Time when the user logged in.Login Time
How long the user has been idle.Idle Time
This is the WHAT field in show system users command
output.
Processes that the user is running.Command
Memory Usage
108 Using the Monitoring Tools
J-series Services Router Administration Guide