Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-41
Section 4. Programming Reference
PN 9001081
Rev. C
Printer Output
1. Auto-smoothing (when enabled) is only effective if the character expansion
rate is at least (3) times in each direction.
2. Characters may be enlarged through the use of the <ESC>L Character
Expansion command (see Page 4-25).
3. Character spacing may be altered through the use of the <ESC>A Character
Pitch command (see Page 4-28).
4. A font must be defined for each field to be printed. There is no default font.
5. The proportionally spaced fonts XU, XS, XM, XL and XB can be printed with
fixed spacing using the <ESC>PS Proportional Space command.
Special Notes