Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 2-15
Section 2. Installation and Configuration
PN 9001081
Rev. C
DSW2
ON
OFF
1 2 3 4
5 6 7 8
DSW2-6
Reserved
Reserved
DSW2
ON
OFF
1 2 3 4
5 6 7 8
DSW2
ON
OFF
1 2 3 4
5 6 7 8
DSW2-7 SETTING
Off Standard
On Non-Std.
DSW2-8 SETTING
Off Normal
Operation
On Orig.M-5900
Dip Switch Settings
Reserved for future use (DSW2-6)
Protocol Code Selection (DSW2-7): Selects the command codes used for
protocol control. Refer to Appendix E for more information.
Emulation Mode (DSW2-8): For emulating features of the original M-5900
software.
DSW3
ON
OFF
1 2 3 4
5 6 7 8
DSW3-1 DSW3-2 SETTING
Off Off Batch/Continuous
Off On Tear Off
On Off Cutter
On Off Dispenser
Mode Selection (DSW3-1 and DSW3-2): Selects the operating mode of the
printer. Batch/Continuous disables the label taken (Dispense option) sensor.
Printer Setup