Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-101
Section 4. Programming Reference
PN 9001081
Rev. C
Two-Dimensional Bar Codes
Data Matrix, Print Data
This command is used to create two-dimensional symbologies
supported by M-5900RV printers
Command Structure
<ESC>DCxx...x
xx...x = Data, maximum of 500 characters
Example: <ESC>DC00006000
Placement: Immediately following the <ESC>BC Data Format designation
command or the <ESC>FX Sequential Numbering command
Default: None
Command Function
To print a Data Matrix two-dimensional bar code image on a label.
Printer Input
<ESC>A
<ESC>%0<ESC>V0100<ESC>H0100<ESC>BX05051010000000001
<ESC> DCDATA MATRIX DATA MATRIX
<ESC> Q1<ESC> Z
Printer Output
Special Notes
1. The maximum amount of data that can be printed with this command is 500
characters.
2. If an <ESC>BX Data Format designation command contains any parameters out of
the valid range, no symbol will be printed when this command is sent.