Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-24
Section 4. Programming Reference
PN 9001081
Rev. C
Printer Output
Special Notes
1. When printing the custom character using the Recall command, the character is
affected by the following commands:
Character Expansion (see Page 4-25)
Character Pitch (see Page 4-28)
Line Feed (see Page 4-52)
Rotate, Fixed Base Reference Point (see Page 4-70)
Rotate, Moving Base Reference Point (see Page 4-72)
2. The characters are stored in volatile memory and must be reloaded if the printer
power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line feed) as line
delimiters within the graphic data or the actual image will not be printed as specified.