Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-62
Section 4. Programming Reference
PN 9001081
Rev. C
Print Position
(1) Limited by the number of digits in the command field
(2) When a Memory Card is used to expand the print length, the card capacity
is used instead of the internal memory, not in addition to the internal memory.
Special Notes (cont.)
3. If any part of an image is placed past the maximum number of dots for standard
length and or the capacity of the memory card, that part of the image will be lost.
4. If any part of an image is placed past maximum allowable dots across the label, that
part of the image will be lost.
5. If you attempt to print where there is no paper, you may damage the print head.
6. For these commands, the leading zeroes do not have to be entered. The command
V1 is equivalent to V0001.
VR0095-M
htdiWtnirPmumixaM
aaaa
stod698
.ni4.4
mm211
htgneLtnirPdradnatS
bbbb
stod4241
.ni0.7
mm871
htiwdednapxE
XA>CSE<
bbbb
stod8482
.ni0.41
mm653
draCyromeMhtiwhtgneLmumixaM
)2(
etybK821
bbbb
stod7521
.ni2.6
mm751
etybK215
bbbb
stod8305
.ni8.42
mm926
etybM1
bbbb
stod9999
)1(
.ni2.94
mm9421
etybM2
bbbb
stod9999
)1(
.ni2.94
mm9421