Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-84
Section 4. Programming Reference
PN 9001081
Rev. C
Memory Card Function
Expand Memory Area
VR0095-M
htgneLtnirPdradnatS
stod4241
.ni0.7
mm871
XA>CSE<htiwdednapxE
dnammoC
stod8482
.ni0.41
mm653
draCyromeMhtiwhtgneLmumixaM
)2(
etybK821
stod7521
.ni2.6
mm751
etybK215
stod8305
.ni8.42
mm926
etybM1
stod9999
)1(
.ni2.94
mm9421
etybM2
stod9999
)1(
.ni2.94
mm9421
(1) Limited by the number of digits in the command field.
(2) When a Memory Card is used to expand the print length the card capacity is
used instead of the internal memory not in addition to the internal memory.
Special Notes (Cont.)
7. If a job contains elements out of the memory range it is ignored.
8. This command cannot be used with the <ESC>AX and <ESC>AR Expanded
Print Length commands, or the <ESC>R Rotate, Moving Base Reference Point
command.
9. If the Forms Overlay command <ESC>& is used with a Memory Card to
expand the print area, the Form Overlay length is still limited to 14".