Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-97
Section 4. Programming Reference
PN 9001081
Rev. C
Custom Protocol Command Codes
Download
Command Structure
<ESC>LD,a,b,c,d,e,f,g,h.,i
a = Replacement character for STX in ASCII or hex format
b = Replacement character for ETX in ASCII or hex format
c = Replacement character for ESC in ASCII or hex format
d = Replacement character for ENQ in ASCII or hex format
e = Replacement character for CAN in ASCII or hex format
f = Replacement character for NULL in ASCII or hex format
g = Replacement character for OFFLINE in ASCII or hex format
h = Auto-Online. Printer powers up in the Online mode.
0 = Yes
1 = No
i = Zero Slash. Places a slash through the "0" character.
0 = Yes
1 = No
Example: <ESC>LD,{,},%,#,&,*,~,0,0
Placement: Immediately following the <ESC>A Start command and in an
independent data stream.
Default: Standard Protocol command codes
Command Function
Allows the user to define Custom Protocol command codes
Printer Input
<ESC>A
<ESC>LD,{,},%,#,&,*,~,0,0
<ESC> Z
Printer Output
A Protocol Command code status label will be printed as a result of a successful
download of a custom set of Protocol Command codes.
(Next Page)