Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual Page A-3
Appendix A. Command Quick Reference
INSTRUCTION DESCRIPTION
PN 9001081
Rev. C
BWaabbb Bar Codes. Expansion. Works together with the BT Page 4-18
command to specify an expansion factor and the bar
code height for the particular symbol being printed.
aa = Expansion factor by which the width of all bars and
spaces is increased (01-12)
bbb = Bar height by dot (004-600 dots)
BXaabbccdd Data Matrix. Data Format. Specifies the format of the Data Page 4-99
eeeffffghh Matrix 2-D symbology.
aa = Format ID (01-16, The values 07 and 17 will not
be accepted).
bb = Error correction level (00, 01, or 04-14, the values
02, 03 or >/-15 will not be accepted).
cc = Horizontal cell size (03-12 dots/cell)
dd = Vertical cell size (03-12 dots/cell)
eee = Cells per line. Must use 000 for optimized symbol.
fff = Cell lines. Must use 000 to optimize.
g = Mirror image
0 Normal Print
1 Reverse Print
hh = Guide cell thickness (01-15) 01 indicates normal type
C Repeat Label. Prints a duplicate of the last label printed. Page 4-65
CSa Print Speed Selection. Specifies a unique print speed in Page 4-64
in./sec through software for a particular label.
Dabbcccd Bar Codes. Prints 1:2 ratio bar code. For UPC and EAN Page 4-13
bar codes. This will add descender bars. For values a, bb, ccc
and d see instructions for Babbcccd.
DCxx...x Data Matrix. Print Data. Prints data using Data Matrix format Page 4-101
specified in BX Data Format command.
xx...x = Data to be printed. Cannot exceed 500 characters.
Eaaa Line Feed. Provides the ability to print multiple lines of the Page 4-52
same character size without specifying a new print position
for each line.
aaa = Number of dots (1-999) between the bottom of the
characters on one line to the top of the characterrs
on the next line.
)tluafeD(ffO8-2WSD)elbitapmoC(nO8-2WSD
gnitteSdeepS=a
)s/mm05(spi2=2
)s/mm57(spi3=3
)s/mm001(spi4=4
)s/mm521(spi5=5
)s/mm05(spi2=2ro1
)s/mm57(spi3=3
)s/mm001(spi4=4
)s/mm521(spi5=5