Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-44
Section 4. Programming Reference
PN 9001081
Rev. C
Form Overlay, Store
Command Structure
<ESC>&
Example: See above
Placement: Must be preceded by all other data and placed just before the Stop
command (<ESC>Z).
Default: None
Command Function
To store a label image in the volatile form overly memory. Only one label image may be
stored in this memory area at a time.
Printer Input
<ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z
Printer Output
There is no output form this command. It stores the label image in the overlay buffer.
1. Remember that this storage is volatile. Therefore, if the printer loses power, the
overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall command (see
Page 4-43).
3. Form overlays do not have to be recompiled each time they are called to be
printed and therefore may result in much faster print output.
Special Notes