Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-91
Section 4. Programming Reference
PN 9001081
Rev. C
Memory Card Function
Graphics, Custom Store
Special Notes
1. This command requires the Memory Card option. See your SATO
representative for details.
2. The maximum storage capacity is 999 graphics, up to the capacity of
the memory card used.
3. If a data transmission error occurs, the printer will beep and the
"ERROR" LED will come on. You must then retransmit the image.
See Appendix D for information on Memory Card error reporting.
4. Each graphic to be stored must be sent in its own data stream.
Example of correct data stream:
<ESC>A
<ESC>GIHaaabbb001(DATA)
<ESC>Z
<ESC>A
<ESC>GIHaaabbb002(DATA)
<ESC>Z
Example of incorrect data stream:
<ESC>A
<ESC>GIHaaabbb001(DATA)
<ESC>GIHaaabbb002(DATA)
<ESC>Z
5. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image will
not be printed as specified.