Filter
Top Products
PN 9001081
Rev. C
SATO M-5900RV Operator and Technical Reference Manual
Page 1-3
Section 1. Printer Overview
STEP PROCEDURE
4. If the field placement is incorrect or if the printer "beeps" indicating it
did not accept the command stream, place DSW2-8 in the ON
position, cycle power to make the printer recognize the new switch
setting and resend the label.
5. If the print still does not accept the command stream, then something
in the command stream is not correct. It must be examined carefully
to make sure it conforms with all of the rules for usage outlined in
Section 4: Programming Reference.
If any problems are encountered with M-5900 compatibility, please
contact the SATO Technical Support Department.
Compatibility
1.3 General Printer Specifications
NOITACIFICEPSVR0095-M
tnirP
dohteMylnolamrehTtceriD
)elbatceleSresU(deepS
)s/mm57-spi3tluafeD(spi7.4ot2
s/mm021ot05
)eziStoD(eludoMtnirP
ni9400.
mm521.
noituloseR
ipd302
mmpd8
ssenkraDtnirPelbatcelesspets5
htdiWtnirPmumixaM
.ni4.4
mm211
htgneLtnirPmumixaM
)htgneLtnirPdednapxE(
.ni41
mm653
htgneLtnirPmumixaM
draCyromeMBM2htiw
.ni2.94
mm9421