Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-90
Section 4. Programming Reference
PN 9001081
Rev. C
Memory Card Function
Graphics, Custom Store
This command requires the Memory Card option.
Command Structure
<ESC>Glabbbcccddd{data}
a = Specifies character format of the data
H Hex data
B Binary data
bbb = Number of horizontal 8 x 8 blocks (001-248)
ccc = Number of vertical 8 x 8 blocks (001 -267)
ddd = Graphics storage number (001-999)
{data} = Hex or binary data to describe the graphic Image
Example: See Appendix C for detailed information on creating Hex and Binary
graphic files.
Placement: Immediately following the <ESC>CC Slot Select command.
Default: None
Command Function
To provide similar functionality to the <ESC>G Custom Graphic command (see Page
4-45), but allows for the graphic image to be stored in a Memory Card. Use the Store
command to send the graphic data to the printer, which is held in the optional memory
card even if printer power is lost.
Printer Input
<ESC>A
<ESC>CC1<ESC>GIH002002001
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0
<ESC> Z
Note: See Appendix C for detailed explanation on how to format a graphics data
stream.
Printer Output
There is no printer output for this command. See <ESC>GR Recall Custom Graphics
command.