Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-82
Section 4. Programming Reference
PN 9001081
Rev. C
Memory Card Function
Clear Card Memory
Command Structure
<ESC>*a,bb
a = Memory card section to be cleared
G To clear SATO graphics files from memory card
P To clear PCX graphics files
F To clear formats from the memory card
O To clear TrueType fonts
bb = Memory Card storage area to be cleared
01 to 99 for Graphics, PCX or Formats
00 to 99 for TrueType fonts
Example: <ESC>*G,01
Placement: This command should be sent to the printer immediately
following the <ESC>CC Slot Select command.
Default: None
Command Function
To clear individual memory areas in the Memory Card.
Printer Input
<ESC>A
<ESC>CC1<ESC>*O,09
<ESC> Z
Printer Output
There is no printer output as a result of his command.
Special Notes
1. To clear everything in the memory card, use the <ESC>BJF Memory
Card Initialize command (dee Page 4-94).
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if a memory card is not installed in the printer.